The complex modulus tests were conducted on four different asphalt samples: 50/70, 50/70A, 50/70B, and 10/20, at different temperatures and frequencies, to determine the modeling parameters included in the 2S2P1D model that characterize the response of asphalt in the linear viscoelastic domain. The results obtained from the different samples using the 2S2P1D model were compared to the experimental model in the Cole-Cole and Black space representations.

complex module, asphalt, thermomechanics.

Received: August 7, 2024; Accepted: October 1, 2024; Published: October 17, 2024

How to cite this article: Annouar Djidda Mahamat, Oumar Idriss Hamid, Moussa Ali Abdoulaye and Kenmeugne Bienvenu, Complex modulus testing of bitumens 50/70 and 10/20 using the 2S2P1D model, International Journal of Materials Engineering and Technology 23(2) (2024), 119-131. https://doi.org/10.17654/0975044424007

This Open Access Article is Licensed under Creative Commons Attribution 4.0 International License

References:
[1] Annouar Djidda, Kenmeugne Bienvenu, Moussa Ali Abdoulaye and Fogue Médard, Degradation phenomenon of bituminous pavement in Sahel zone, International Journal of Materials Engineering and Technology 14(2) (2015), 79 91.
[2] C. De LaRoche, J. M. Piau and P. Dangla, Thermal effects induced by viscoelastic dissipation during fatigue tests on bituminous mixtures, Proc., 6th Int. Symp. On Creep and Coupled Processes, 1998.
[3] Hervé Di Benedetto, François Olard, Cédric Sauzéat and Brice Delaporte, Linear viscoelastic behaviour of bituminous materials: from binders to mixes, Road Materials and Pavement Design Taylor and Francis 5 (2004), 163-202.
[4] X. Lu, H. Soenen and P. Redelius, Fatigue and healing characteristics of bitumens studied using dynamic shear rheometer, Sixth International RILEM Symposium on Performance Testing and Evaluation of Bituminous Materials, 2003, pp. 408 415.
[5] F. Olard and H. Di Benedetto, General 2S2P1D model and relation between the linear viscoelastic behaviours of bituminous binders and mixes, Road Material and Pavement Design Taylor and Francis 4 (2003), 77-107.