DESIGN AND ANALYSIS OF HALL EFFECT SENSOR AND ARDUINO CONTROLLED LIQUID FLOW MEASUREMENT
In this experiment, Arduino is connected to YFS201 Hall Effect Petrol Flow Sensor to measure the flow rate of liquid. This is an excellent undertaking that may be applied to industry, the home, or applications for measuring the flow of gasoline in gasoline taps, tunnels, rivers, etc. In India, gasoline is a common form of automotive fuel. Using an Arduino, a gasoline flow sensor can measure flow rate. This research can extensively be used to gauge the amount of liquid flowing through a pipe or container or to build a control system depending on the amount or rate of liquid flow.
flow meter, Hall effect sensor, Arduino, rate of flow.
Received: September 8, 2023; Revised: September 21, 2023; Accepted: November 9, 2023; Published: December 4, 2023
How to cite this article: B. Magamai Radj and R. Kamalanathan, Design and analysis of Hall effect sensor and Arduino controlled liquid flow measurement, Advances and Applications in Fluid Mechanics 30(2) (2023), 147-155. http://dx.doi.org/10.17654/0973468623008
This Open Access Article is Licensed under Creative Commons Attribution 4.0 International License
References:
[1] R. Sood, M. Kaur and H. Lenka, Design and development of a automatic water flow meter, International Journal of Computer Science, Engineering and Applications 3(3) (2013), 49-59.[2] A. P. A. More, Automation of fuel measurement and air pressure in the wheel based on IoT technology, Int. J. Res. Appl. Sci. Eng. Technol. 7(6) (2019), 43-48. doi: 10.22214/ijraset.2019.6011.[3] P. Akpan, A CFD simulation of water flow through a venturi meter, Artic. Int. J. Curr. Res. 6(3) (2014), 5425-5431.[Online]. Available: https://www.researchgate.net/publication/266390140.[4] P. H. Vijay, CFD simulation on different geometries of venturimeter, Int. J. Res. Eng. Technol. 3(7) (2014), 456-463. doi: 10.15623/ijret.2014.0307078.[5] N. A. Cloete, R. Malekian and L. Nair, Design of smart sensors for real-time water quality monitoring, IEEE Access 4 (2016), 3975-3990.doi: 10.1109/ACCESS.2016.2592958.[6] P. Megantoro, A. Widjanarko, R. Rahim, K. Kunal and A. Z. Arfianto, The design of digital liquid density meter based on Arduino, J. Robot. Control 1(1) (2020), 1-6. doi: 10.18196/jrc.1101.[7] X. J. Li and P. H. J. Chong, Design and implementation of a self-powered smart water meter, Sensors (Switzerland), 19(19) (2019), 4177.doi: 10.3390/s19194177.[8] H. Rahmiati, The creation of data pattern of kerosene-mixed gasoline by utilizing gas sensor and fast Fourier transform method to detect the purity of gasoline, International Journal of Computer Techniques 5(1) (2018), 44-49.[9] V. Kude and A. Patil, Detection of fuel adulteration in real time using optical fiber sensor and peripheral interface controller, Int. J. Opt. Photonics 11(2) (2017), 95-102. doi: 10.18869/acadpub.ijop.11.2.95.[10] V. Singh, Determination of adulteration and quantity of gasoline fuel using IoT method, National Conference on Communication and Image Processing, 2019.[11] B. T. Rama Krishnan, B. T. Roshan, B. T. Ashfaq Ahmed and B. T. Srinivasan, Digitalized flow quantity and adulteration measurement in petrol, International Journal of Engineering Research & Technology 8(6) (2019), 691-694.[12] G. S. Boudreau, J. A. McAvoy and M. D. Moran, WaterMainia Senior Design Project Report, 2017.[13] M. Simão, M. Besharat, A. Carravetta and H. M. Ramos, Flow velocity distribution towards flowmeter accuracy: CFD, UDV, and field tests, Water (Switzerland) 10(12) (2018), 1807. doi: 10.3390/w10121807.[14] A. T. Pérez and M. Hadfield, Low-cost oil quality sensor based on changes in complex permittivity, Sensors 11(11) (2011), 10675-10690.doi: 10.3390/s111110675.[15] P. S. Daingade, A. S. Patil, D. B. Nikam, R. Mangesh, S. S. Kharade and A. J. More, The quality and quantity testing of gasoline fuel using sensing method, International Research Journal of Engineering and Technology (IRJET) 5 (2018), 2948-2953.