Keywords and phrases: red earth, copper content, SEM, EDS, XRD.
Received: November 3, 2020; Revised: December 15, 2020; Accepted: December 29, 2020; Published: April 12, 2021
How to cite this article: Abdelkrim Moufakkir, Sara Belarouf, Oumaima Nasry, Abderrahim Samaouali, Hraita Mohammed, Saïfed-Dîn Fertahi and Abdellah Elbouzidi, Chemical-mineralogical characterization of red earth doped with different copper powder contents, JP Journal of Heat and Mass Transfer 22(2) (2021), 151-168. DOI: 10.17654/HM022020151
This Open Access Article is Licensed under Creative Commons Attribution 4.0 International License
References:
[1] Eid Elie, Seghir Rian and Réthoré Julien, Multiscale analysis of brittle failure in heterogeneous materials, Journal of the Mechanics and Physics of Solids, Available online 29 October 2020, 104204. https://doi.org/10.1016/j.jmps.2020.104204. [2] J. P. Nguetnkam, R. Kamga, F. Villiéras, G. E. Ekodeck, A. Razafitianamaharavo and J. Yvon, Assessment of the surface areas of silica and clay in acid-leached clay materials using concepts of adsorption on heterogeneous surfaces, Journal of Colloid and Interface Science 289(1) (2005), 104-115. https://doi.org/10.1016/j.jcis.2005.03.053. [3] Vanessa Guimarães, Ana R. Teixeira, Marco S. Lucas, Adrián M. T. Silva and José A. Peres, Pillared interlayered natural clays as heterogeneous photocatalysts for H2O2-assisted treatment of a winery wastewater, Separation and Purification Technology 228 (2019), 115768. https://doi.org/10.1016/j.seppur.2019.115768. [4] Awinash Kumar and Pradip Lingfa, Sodium bentonite and kaolin clays: comparative study on their FT-IR, XRF, and XRD, Materials Today: Proceedings 22(3) (2020), 737-742. https://doi.org/10.1016/j.matpr.2019.10.037. [5] Pere Borralleras, Ignacio Segura, Miguel A. G. Aranda and Antonio Aguado, Influence of experimental procedure on d-spacing measurement by XRD of montmorillonite clay pastes containing PCE-based superplasticizer, Cement and Concrete Research 116 (2019), 266-272. https://doi.org/10.1016/j.cemconres.2018.11.015. [6] Xiang Zhou, Dong Liu, Hongling Bu, Liangliang Deng, Hongmei Liu, Peng Yuan, Peixin Du and Hongzhe Song, XRD-based quantitative analysis of clay minerals using reference intensity ratios, mineral intensity factors, Rietveld, and full pattern summation methods: a critical review, Solid Earth Sciences 3(1) (2018), 16-29. https://doi.org/10.1016/j.sesci.2017.12.002. [7] A. Ahmed, Y. Chaker, El H. Belarbi, O. Abbas, J. N. Chotard, H. B. Abassi, A. Nguyen Van Nhien, M. El Hadri and S. Bresson, XRD and ATR/FTIR investigations of various montmorillonite clays modified by monocationic and dicationic imidazolium ionic liquids, Journal of Molecular Structure 1173 (2018), 653-664. https://doi.org/10.1016/j.molstruc.2018.07.039. [8] Wei Zhao and Wen-Feng Tan, Quantitative and structural analysis of minerals in soil clay fractions developed under different climate zones in China by XRD with Rietveld method, and its implications for pedogenesis, Applied Clay Science 162 (2018), 351-361. https://doi.org/10.1016/j.clay.2018.05.019. [9] L. Andrini, M. R. Gauna, M. S. Conconi, G. Suarez, F. G. Requejo, E. F. Aglietti and N. M. Rendtorff, Extended and local structural description of a kaolinitic clay, its fired ceramics and intermediates: an XRD and XANES analysis, Applied Clay Science 124-125 (2016), 39-45. https://doi.org/10.1016/j.clay.2016.01.049. [10] M. H. Chambers, D. S. L. Lawrence, B. W. Sellwood and A. Parker, Annual layering in the Upper Jurassic Kimmeridge clay formation, UK, quantified using an ultra-high resolution SEM-EDX investigation, Sedimentary Geology 137(1-2) (2000), 9-23. https://doi.org/10.1016/S0037-0738(00)00092-0. [11] Jizhen Zhang, Youjun Tang, Daxiang He, Peng Sun and Xiaoyan Zou, Full-scale nanopore system and fractal characteristics of clay-rich lacustrine shale combining FE-SEM, nano-CT, gas adsorption and mercury intrusion porosimetry, Applied Clay Science 196 (2020), 105758. https://doi.org/10.1016/j.clay.2020.105758. [12] Abdelkrim Moufakkir, Abderrahim Samaouali, Abdellah Elbouzidi, Salah El Alami and Abderrahim Dinane, Thermophysical characterization of composite clay materials doped by the copper powder according to the temperature, WSEAS Transactions on Environment and Development. doi:10.37394/232015.2020.16.34. [13] Abdelkrim Moufakkir, Abderrahim Samaouali, Abdellah Elbouzidi, Abderrahim Dinane and Salah El Alami, The thermal behavior of the laminated composite material (clay reinforced with copper fibers) on the effect of temperature and composition, JP Journal of Heat and Mass Transfer 20(2) (2020), 189-204. http://dx.doi.org/10.17654/HM020020189. [14] Abdelkrim Moufakkir, Abderrahim Samaouali, Abdellah Elbouzidi, Salah El Alami and Abderrahim Dinane, The influence of the percentage of porosity on the thermal conductivity of a composite material, for example, clay, WSEAS Transactions on Environment and Development. doi:10.37394/232015.2020.16.58. [15] Abdelkrim Moufakkir, Salah El Alami, Sara Belarouf, Houda Soulami, Abderrahim Samaouali, Bousselham Kabouchi and Abderrahim Famiri, Physical-mechanical characterisation and drying wood of Holm-Oak bush from Azrou region - Morocco, JP Journal of Heat and Mass Transfer 21(1) (2020), 151-166. http://dx.doi.org/10.17654/HM021010151. [16] Abderrahim Samaouali, Hanane Sghiouri El Idrissi, Younes El Rhaffari, Mohamed Hraita, Abdelkrim Moufakkir, Sara Belarouf, Houda Soulami and Mohamed Charia, Thermal conductivity and porosity characterization of calcarenites stones used in historical buildings, JP Journal of Heat and Mass Transfer 21(2) (2020), 237-250. http://dx.doi.org/10.17654/HM021020237. [17] Sara Belarouf, A. Samaouali, Kamal Gueraoui and H. Rahier, Mechanical properties of concrete with recycled concrete aggregated, International Review of Civil Engineering 11(6) (2020). https://doi.org/10.15866/irece.v11i6.18478.
|